Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of UBE Nylon 1024 JI - PA6 - UBE

Material Data Center offers the following functions for UBE Nylon 1024 JI:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ube Nylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 9 g/10min ASTM D 1238
온도 235 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
항복강도 31 MPa ISO 527
파단시 신율 >50 % ISO 527
굴곡 계수, 23°C 630 MPa ISO 178
ASTM 데이터
쇼어 D 경도 50 - ASTM D 2240
아이조드 충격은 노치, 1/8 in 154 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 219 °C ISO 11357-1/-3
하중하에서의 변형온도, 0.45 MPa 104 °C ISO 75-1/-2
기타 특성값단위시험규격
밀도 1110 kg/m³ ISO 1183
특징
생산 공정
기타 압출
인도 유형
자연 색상
부가물
가소제
특별 특성
고충격 또는 고충격 보강
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.